Worcester County Well Water Testing
Private-well guidance for Worcester County, Massachusetts: USGS area-risk estimates for arsenic and nitrate, a recommended test panel, and how to get your own well tested at a Massachusetts-certified lab.
Worcester County groundwater risk (area estimates)
These are modeled USGS estimates for the county area — not a measurement of your specific well.
Arsenic
area estimate13%
modeled chance a well in this area exceeds 10 µg/L (the EPA limit).
15% chance of exceeding 5 µg/L.
Most-probable concentration category: <=5 ug/L.
Nitrate
area estimate0.17 mg/L
predicted nitrate (as N) for domestic-supply depth.
This estimate is below the 10 mg/L EPA limit, but individual wells can still exceed it.
Private wells
area estimate109,574
people on private wells in Worcester County.
Roughly 43,830 households, estimated from the USGS modeled domestic-supply population.
Area context
Additional state-only or optional layers for Worcester County, shown where the data exists.
Uranium
area estimateA state-only uranium model is not available for Massachusetts. See observed samples and test your own well to learn its uranium level.
Radon
area estimateA state-only radon model is not available for Massachusetts. See observed samples and test your own well to learn its radon level.
Agricultural land use
area contextAbout 0% of the Worcester County area is row-crop farmland (USDA Cropland Data Layer). Intensively farmed row-crop land raises the likelihood of elevated nitrate in nearby groundwater, so it is a reason to include nitrate in your test panel. This is land-use context for the county area — not a measurement of nitrate in any well.
PFAS
public-system proxyPFAS were detected in 24 of 45 public water systems tested in Worcester County under the EPA's national PFAS monitoring program (UCMR5).
This reflects PFAS detections in public water systems near Worcester County — a regional proxy, not a measurement of private wells. If you rely on a private well, only a lab test of your own water reveals its PFAS level.
These figures are USGS area estimates: statistical groundwater models describing how likely elevated contaminant levels are across a county. They are not designed to predict the concentration in any single well. Only testing your own well reveals its water quality.
Recommended test panel for Worcester County
- coliform
- arsenic
Coliform bacteria is recommended for every private well as the universal baseline test. Arsenic is flagged because the USGS area model estimates a 13% chance of exceeding 10 µg/L. The federal loan minimum (FHA, VA, USDA) tests for coliform, nitrate, nitrite, lead.
Federal FHA, VA, and USDA home loans require testing for coliform, nitrate, nitrite, lead at the point of a federally-backed loan. See the program-specific rules: FHA well test, VA well test, USDA well test.
Already have lab results? Interpret your well water test results to see how your own numbers compare to EPA limits.
How Worcester County compares across Massachusetts
Where Worcester County's modeled area estimates sit relative to the other Massachusetts counties in our analysis.
- Arsenicabove the Massachusetts median
Worcester County: 13% · Massachusetts median: 7% · flagged in 3 of 14 counties.
See all Massachusetts arsenic data → - Nitratenear the Massachusetts median
Worcester County: 0.17 mg/L · Massachusetts median: 0.16 mg/L · flagged in 0 of 14 counties.
See all Massachusetts nitrate data →
Municipal (public) water in Worcester County
Most Worcester County residents are served by a public water system, not a private well. If that's you, open your city's tap-water quality report:
- Worcester
- Northborough
- Leominster
- Fitchburg
- Shrewsbury
- Milford
- Webster
- Westborough
- Gardner
- Southbridge
- Holden
- Whitinsville
+ 47 more — search every city.
Prefer a Simpler Option?
Can't find a convenient local lab? Mail-in testing offers EPA-certified analysis without appointments or travel.
SimpleLab
Advanced Home Water Test
$369
Most comprehensive home water test including all standard tests plus additional parameters for ultimate peace of mind.
SimpleLab
Standard Home Water Test
$232
Comprehensive water analysis testing over 200 contaminants including bacteria, heavy metals, and chemical compounds.
Tap Score
Volatile Organic Compounds (VOC) Test
$139
Detects volatile organic compounds including industrial solvents, fuels, and chemical contaminants.
Find a state-certified lab
Test your Worcester County well through a lab certified by the Massachusetts Department of Environmental Protection — find one in the official directory (Searchable online database—filter by "Drinking Water" program).
Recognize & research well-water problems
Notice a problem? Diagnose it by symptom
Learn about these contaminants in drinking water
Data sources
Worcester County's estimates are modeled from public federal datasets. See the data & methodology for how we build, source, and validate them.
- USGS arsenic probability-of-exceedance model
- USGS nitrate predicted concentration, domestic-supply depth
- USGS domestic (private) well population density
- USDA NASS Cropland Data Layer (CDL) 30m
- EPA UCMR5 PFAS occurrence in public water systems (Fifth Unregulated Contaminant Monitoring Rule)
- EPA/USGS Water Quality Portal (waterqualitydata.us)
- US Census TIGER/Line county polygons
By TapWaterData Editorial · Last updated June 26, 2026.
Worcester County well water FAQ
How do I test my well water in Worcester County?
Order a sample kit covering the recommended panel for Worcester County (coliform, arsenic), then send it to a Massachusetts-certified drinking-water laboratory. Certified labs use EPA-approved methods, so the results are defensible for a federally-backed home loan. You can also use a mail-in test kit for a convenient EPA-certified analysis.
What does the USGS arsenic estimate mean for my well?
It is an area estimate, not a prediction for your specific well. The USGS model describes how likely elevated arsenic is across Worcester County as a whole; an individual well in the county can be much higher or much lower. Only testing your own well reveals its actual arsenic level.
How often should a private well be tested?
The CDC recommends testing private wells at least once a year for total coliform bacteria and nitrate, and more often if you notice a change in taste, color, or odor, or after flooding or nearby construction.
Does Massachusetts require well testing?
Federal FHA, VA, and USDA home-loan programs require a private-well water test at the point of a federally-backed loan. A state sale, rental, or recurring testing mandate was not independently verified for this state — consult your state's program.
Stay Informed About Your Water Quality
Get EPA reports, filter recommendations, and safety alerts for your area.
Join 10,000+ people protecting their families. Unsubscribe anytime.