Choose a country: United States
Millersview Tap Water Quality Report
Millersview's water record shows 3 contaminants above EPA MCLGs and 3 above EPA's legal limit (MCL), 8 contaminants with an EPA health goal detected in some samples (no level on file), an EPA lead 90th percentile above the 15 ppb action level, 2 open health-based EPA violations and 49 health-based EPA violations that began after the latest compliance result on file. We recommend using a certified water filter.
Water system
MILLERSVIEW-DOOLE WSC
People Served
3,987
Health-based violations since 2020
80 (2 open)
MILLERSVIEW-DOOLE WSC. EPA SDWA violation data as of Q2 2026 (downloaded 2026-07-09).
Latest sample on file
Dec 2025 · MILLERSVIEW-DOOLE WSC
Utilities publish newer results in their annual water quality report (Consumer Confidence Report).
Is Millersview Tap Water Safe to Drink?
We strongly recommend using a certified water filter to reduce exposure: Millersview's water record shows 3 contaminants above EPA MCLGs and 3 above EPA's legal limit (MCL), 8 contaminants with an EPA health goal detected in some samples (no level on file), an EPA lead 90th percentile above the 15 ppb action level, 2 open health-based EPA violations and 49 health-based EPA violations that began after the latest compliance result on file. Check our filter recommendations below for NSF-certified options that can remove the specific contaminants found in Millersview's water.
MILLERSVIEW-DOOLE WSC, Millersview's water system, serves 3,987 people. Water quality testing is conducted regularly and reported to the EPA. The latest sample on file for MILLERSVIEW-DOOLE WSC is from Dec 2025.
In EPA's 2023–2026 UCMR 5 testing, MILLERSVIEW-DOOLE WSC measured lithium at up to 184 µg/L, which EPA counts as above its health reference level of 10 µg/L. That level is a screening value EPA uses to decide what to study further, not a legal limit, and this result does not change this page's water-quality summary.
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Texas
Millersview Water Service Areas
What these numbers actually mean for Millersview, TX
We read Millersview, TX’s published record and send you a short report — which findings warrant a decision, which to ignore, and what to do about it. Including when the answer is nothing.
- 3 contaminants above EPA MCLGs and 3 above EPA's legal limit (MCL), 8 contaminants with an EPA health goal detected in some samples (no level on file), an EPA lead 90th percentile above the 15 ppb action level, 2 open health-based EPA violations and 49 health-based EPA violations that began after the latest compliance result on file
- 232 results on file
- 23 PFAS compounds on record
Buying a home here? Property Water Report — $49 Emailed within one business day.
Fluoride in Millersview's water
MILLERSVIEW-DOOLE WSC
PWSID TX0480015
Fluoride was detected in 42.8% of MILLERSVIEW-DOOLE WSC's samples (median below the detection limit).
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
Free forever. Unsubscribe anytime. We never share your email.
Recommended Water Filters for Millersview
Based on Millersview's water quality data, these NSF-certified filters are recommended to remove contaminants above EPA's health goals (MCLGs) or legal limits (MCL) and to reduce lead (its water system's EPA lead 90th percentile is above the 15 ppb action level).
AquaTru
Classic
NSF Certified:
Flow Rate
0.04 gpm
Daily Production
600 gpd
Highlights:
- Best overall contaminant reduction score
- Most performance certifications
- Lifetime warranty
- NSF-42, NSF-53, NSF-58, NSF-401 certified
Removes 23 contaminants:
+18 more
Molybdenum, Barium, Chlorine, Arsenic, 83+ contaminants, Calcium, Chloride, Copper, Magnesium, Nitrate, Phosphorus, Sodium, Sulfate, Total Dissolved Solids, Zinc, Total THMs, Chloroform, Nitrate (as N)
AquaTru
Carafe
NSF Certified:
Flow Rate
0.3 gpm
Daily Production
4 gpd
Highlights:
- Verified PFAS reduction
- Glass collection vessel
- Plug-and-play installation
- NSF-53, NSF-42, NSF-58, NSF-401, NSF-372 certified
Removes 17 contaminants:
+12 more
Arsenic, 83+ contaminants, Copper, Total THMs, Chloroform, Chloride, Sulfate, Nitrate (as N), Molybdenum, Barium, Strontium, Uranium
Solventum Purification Inc.
3MRO401
NSF Certified:
Daily Production
11.48 gpd
Highlights:
- NSF-58 certified reverse osmosis system
- 11.48 GPD production capacity
- Reduces total dissolved solids (TDS) for purer water
Removes 15 contaminants:
+10 more
Copper, Cryptosporidium, Fluoride, Lead, Radium 226, Radium 228, Radium, combined (-226 & -228), Selenium, Total Dissolved Solids, Turbidity
Solventum Purification Inc.
3MRO301
NSF Certified:
Daily Production
11.48 gpd
Highlights:
- NSF-58 certified reverse osmosis system
- 11.48 GPD production capacity
- Reduces total dissolved solids (TDS) for purer water
Removes 15 contaminants:
+10 more
Copper, Cryptosporidium, Fluoride, Lead, Radium 226, Radium 228, Radium, combined (-226 & -228), Selenium, Total Dissolved Solids, Turbidity
Verify Your Water Quality with Independent Testing
With 3 contaminants above EPA MCLGs and 3 above EPA's legal limit (MCL), 8 contaminants with an EPA health goal detected in some samples (no level on file), an EPA lead 90th percentile above the 15 ppb action level, 2 open health-based EPA violations and 49 health-based EPA violations that began after the latest compliance result on file, independent laboratory testing provides a second opinion and can track changes over time.
SimpleLab
Advanced Home Water Test
$269
Comprehensive water analysis testing over 200 contaminants including bacteria, heavy metals, and chemical compounds.
Tap Score
Haloacetic Acids (HAA9) Test
$275
Tests for disinfection byproducts formed when chlorine reacts with organic matter in water treatment.
Tap Score
Advanced Microplastics Test
$829
Cutting-edge testing for microplastics particles in drinking water using advanced laboratory techniques.
With 6 contaminants above health guidelines, you may want to explore water purification options. Learn how to make distilled water at home for applications like humidifiers, CPAP machines, and baby formula.
What Millersview's water readings can explain
Utility-reported data for Millersview includes sulfate — the readings behind these common tap water questions. We publish a city-level hardness figure for Millersview, resolved from its water systems where they report one and estimated from county sampling where they do not. Each page starts with the hot-tap and cold-tap check, then shows what your own water system reported.
On a private well near Millersview? Public-water results do not apply to private wells. See Concho County well water testing and USGS risk data — modeled arsenic, nitrate, and the tests to run.
Water softener cost and installation in Millersview
Millersview's tap water measures 5.9 grains per gallon (101.0 mg/L) — moderately hard on the USGS scale, below the range where scale is usually worth treating.
Water softener cost for 5.9 gpg water in Millersview — equipment and local installation labour for your ZIP code, with the sizing arithmetic shown in full. For the national picture first, read what a water softener costs — equipment, installation labour and ten-year ownership, each separated out. For Texas as a whole, read water softener cost in Texas — priced against the plumber wage published for the state.
Frequently Asked Questions About Millersview Tap Water
Millersview's water record shows 3 contaminants above EPA MCLGs and 3 above EPA's legal limit (MCL), 8 contaminants with an EPA health goal detected in some samples (no level on file), an EPA lead 90th percentile above the 15 ppb action level, 2 open health-based EPA violations and 49 health-based EPA violations that began after the latest compliance result on file. We strongly recommend using a certified water filter to reduce exposure to these contaminants. Check our filter recommendations below for NSF-certified options that can remove the specific contaminants found in Millersview's water. EPA records 49 health-based violations for MILLERSVIEW-DOOLE WSC that began after its latest compliance result on file (Jun 2022): Maximum Contaminant Level Violation, Average (TTHM), 17 violations, the first beginning on July 1, 2022 and the latest on April 1, 2026; Maximum Contaminant Level Violation, Average (Total Haloacetic Acids (HAA5)), 10 violations, the first beginning on July 1, 2022 and the latest on April 1, 2026; Maximum Contaminant Level Violation, Average (Combined Radium (-226 and -228)), 11 violations, the first beginning on July 1, 2022 and the latest on April 1, 2025; Maximum Contaminant Level Violation, Average (Gross Alpha, Excl. Radon and U), 11 violations, the first beginning on July 1, 2022 and the latest on April 1, 2025. Every such result predates them; its later EPA UCMR 5 results (Dec 2025) screen for unregulated contaminants and cannot show the water met this standard, so this page does not call the water safe.
Spotted something off on this page?
Residents keep our data honest.
This form corrects our data; it does not reach MILLERSVIEW-DOOLE WSC. For a problem with your water now (discolored water, no water, low pressure, a leak), contact MILLERSVIEW-DOOLE WSC directly.
Check another location
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
One email a week. Unsubscribe anytime.