Choose a country: United States
Brunswick Tap Water Quality Report
No test results on file for Brunswick's own water system: EPA's records place none of the systems listed on this page in Brunswick. Results from other water systems on this page are listed under each system's name; they do not make a verdict for Brunswick. Check your water utility's latest Consumer Confidence Report for its current test results.
Other systems listed for Brunswick with results above guidelines: ECHO LAKE COMMUNITY ASSOCIATION (2 above guidelines), MEDINA CO/SOUTHERN WATER DIST PWS (3 above guidelines)
Water system
Not identified
EPA's records place none of the systems on this page in Brunswick.
2 other systems are listed for Brunswick. See their figures
Health-based violations since 2020
No EPA violation record on file
Is Brunswick Tap Water Safe to Drink?
Everything we hold on Brunswick's water is below — a thin record, not a clean one. Testing your own water is the way to find out what your tap is actually delivering.
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Ohio
Brunswick Water Service Areas
Fluoride in Brunswick's water
MEDINA CO/SOUTHERN WATER DIST PWS
PWSID OH5260712
MEDINA CO/SOUTHERN WATER DIST PWS reported 0.31 mg/L, below the 0.7 mg/L U.S. Public Health Service recommendation.
ECHO LAKE COMMUNITY ASSOCIATION
PWSID OH5200212
ECHO LAKE COMMUNITY ASSOCIATION reported 0.187 mg/L, below the 0.7 mg/L U.S. Public Health Service recommendation.
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
Free forever. Unsubscribe anytime. We never share your email.
General-Purpose Water Filters for Brunswick
No test results are on file for Brunswick's own water system, so these are general-purpose NSF/ANSI 53 certified filters, not chosen for any contaminant.
Pentair Residential Filtration, LLC
Everpure Residential H-300-NXT
NSF Certified:
Capacity
3001 gal
Filter Life
10 mo
Flow Rate
0.5 gpm
Removes 5 contaminants:
Whirlpool Corporation
W11256135
NSF Certified:
Capacity
1001 gal
Filter Life
3 mo
Flow Rate
0.7 gpm
Removes 19 contaminants:
+14 more
Benzene, Carbofuran, Chlorine (Free), Chlorine (Total), Chlorine Dioxide, Chlorobenzene, Cryptosporidium, Ethylbenzene, Lead, Mercury, Metolachlor, Tetrachloroethylene, Toxaphene, Turbidity
Whirlpool Corporation
W11569861
NSF Certified:
Capacity
1001 gal
Filter Life
3 mo
Flow Rate
0.52 gpm
Removes 22 contaminants:
+17 more
Atrazine, Benzene, Carbofuran, Chlorine (Free), Chlorine (Total), Chlorine Dioxide, Chlorobenzene, Cryptosporidium, Ethylbenzene, Lead, Mercury, Metolachlor, Styrene, Tetrachloroethylene, Toxaphene, Trichloroethylene, Turbidity
Santevia
Bath Filter
NSF Certified:
Flow Rate
0.36 gpm
Highlights:
- Organic cotton design reduces plastic used in construction
- Affordable upfront & ongoing cost
- The only bath filter that removed 100% chlorine with “normal” faster faucet flow
Removes 1 contaminants:
No test results on file — test your own tap
We don't hold water-quality results for this system yet, so nobody can tell you what is in your water from published data. A certified lab test is the way to find out.
SimpleLab
Advanced Home Water Test
$269
Comprehensive water analysis testing over 200 contaminants including bacteria, heavy metals, and chemical compounds.
Tap Score
Advanced Microplastics Test
$829
Cutting-edge testing for microplastics particles in drinking water using advanced laboratory techniques.
Tap Score
Haloacetic Acids (HAA9) Test
$275
Tests for disinfection byproducts formed when chlorine reacts with organic matter in water treatment.
What Brunswick's water readings can explain
We publish a city-level hardness figure for Brunswick, resolved from its water systems where they report one and estimated from county sampling where they do not. Each page starts with the hot-tap and cold-tap check, then shows what your own water system reported.
On a private well near Brunswick? Public-water results do not apply to private wells. See Medina County well water testing and USGS risk data — modeled arsenic, nitrate, and the tests to run.
Water softener cost and installation in Brunswick
Brunswick's tap water has an estimated 14.4 grains per gallon (247.0 mg/L, county sampling in Medina County) — very hard on the USGS scale, the range where scale on fixtures and appliances is the usual complaint.
Water softener cost for an estimated 14.4 gpg water in Brunswick — equipment and local installation labour for your ZIP code, with the sizing arithmetic shown in full. For the national picture first, read what a water softener costs — equipment, installation labour and ten-year ownership, each separated out. For Ohio as a whole, read water softener cost in Ohio — priced against the plumber wage published for the state.
Frequently Asked Questions About Brunswick Tap Water
No test results on file for Brunswick's own water system: EPA's records place none of the systems listed on this page in Brunswick. Results from other water systems on this page are listed under each system's name; they do not make a verdict for Brunswick. Check your water utility's latest Consumer Confidence Report for its current test results.
Spotted something off on this page?
Residents keep our data honest.
This form corrects our data; it does not reach your water utility. For a problem with your water now (discolored water, no water, low pressure, a leak), contact your water utility directly.
Check another location
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
One email a week. Unsubscribe anytime.