St. George Fire District 1
Drinking water quality, contact, and Consumer Confidence Report
Serving 0 cities in VT · PWSID VT0005093
St. George Fire District 1 serves 42 people. No water-quality test results are on file for St. George Fire District 1. That is a gap in the EPA record we publish, not a finding about the water. Check St. George Fire District 1's latest Consumer Confidence Report for its current test results.
- People served
- 42
- Health-based violations since 2020
- 0
Data sources: EPA SDWIS, St. George Fire District 1's published Consumer Confidence Report, and compliance monitoring reported to EPA by Vermont DEC Drinking Water.
This page summarizes publicly available EPA and CCR records. For health decisions about your water, consult your utility or a licensed professional.
Help Paying Your St. George Fire District 1 Water Bill
- Ask St. George Fire District 1 about payment plans and assistance.
- Call 211 to reach local help with utility bills.Verified from 211.org
- Find your local Community Action Agency.Verified from communityactionpartnership.com
- The federal water-bill program (LIHWAP) ended in March 2024.Verified from acf.govVerified from csd.ca.gov
Water outage or no water?
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Vermont
St. George Fire District 1 Service Area
Loading map...
This map shows the approximate service area for St. George Fire District 1. Actual coverage may vary. Contact the utility directly to confirm service availability at your address.
St. George Fire District 1 Water Quality Grade
Not graded
No water-quality test results are on file for St. George Fire District 1. That is a gap in the EPA record we publish, not a finding about the water. Check St. George Fire District 1's latest Consumer Confidence Report for its current test results.
Is St. George Fire District 1 Water Safe to Drink?
No water-quality test results are on file for St. George Fire District 1. That is a gap in the EPA record we publish, not a finding about the water. Check St. George Fire District 1's latest Consumer Confidence Report for its current test results.
This utility serves 42 people across 0 cities in VT. Water quality can vary by location within the service area. Check individual city pages below for detailed contaminant data specific to your area.
Get your water independently tested in Vermont →How does Vermont water quality rank nationally? →
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Vermont
Fluoride in St. George Fire District 1 Water
St. George Fire District 1
PWSID VT0005093
No fluoride level in our data for St. George Fire District 1. Your utility's annual water quality report (CCR) lists it.
St. George Fire District 1 Service Area
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
Free forever. Unsubscribe anytime. We never share your email.
St. George Fire District 1 Contact & Information
Phone
Mailing Address
B2B Contact Data
B2B Contact Data Available
Contacts for St. George Fire District 1
| Name | Title | Phone | |
|---|---|---|---|
| J████ S████ | Water Treatment Supervisor | (555) ███-████ | j████@city████.gov |
| M████ J██████ | Utility Director | (555) ███-████ | m████@water████.org |
Water Sources & Treatment
Water Sources
Treatment Methods
St. George Fire District 1 Consumer Confidence Report
A Consumer Confidence Report (CCR) is the EPA-mandated annual water-quality report every community water system must publish by July 1 each year (Safe Drinking Water Act §1414(c)(4)). It summarizes contaminants tested, MCL and MCLG comparisons, and any system violations from the prior calendar year.
A current CCR for St. George Fire District 1 has not been published or validated on TapWaterData yet.
Residents: contact the utility directly using the phone number above, or check the EPA’s national CCR portal. Reports are typically distributed by mail or posted on the utility’s official website.
St. George Fire District 1 Annual Water Quality Reports
We don’t have a link we can confirm belongs to this system, and we’d rather show none than the wrong utility’s. Vermont DEC Drinking Water publishes drinking-water reports for systems in this state.
Visit Vermont DEC Drinking WaterWhat is a CCR? The Consumer Confidence Report (CCR) is an annual water quality report that water utilities are required by the EPA to provide to customers. It contains information about your water source, detected contaminants, and compliance status.
EPA Health-Based Violations Since 2020
St. George Fire District 1 has no health-based EPA violation since 2020 (EPA data as of Q2 2026).
EPA SDWA violation data as of Q2 2026 (downloaded 2026-07-09).
Got a water test back? Get a free reading of every number
Upload your tap water report (PDF or a photo) and we'll email you a plain-English explanation of each contaminant and level — free. Educational only, no medical claims.
Your upload also helps us keep local water data accurate — we only ever share anonymized, area-level summaries.
Upload my testFrequently Asked Questions about St. George Fire District 1
Is St. George Fire District 1 water safe to drink?
Does St. George Fire District 1 have PFAS in its water?
How do I pay my St. George Fire District 1 water bill?
How many people does St. George Fire District 1 serve?
What cities does St. George Fire District 1 serve?
Does St. George Fire District 1 have any EPA violations?
What is St. George Fire District 1's phone number?
Where can I find St. George Fire District 1's Consumer Confidence Report?
Similar water utilities in Vermont
How we built this page
Water-quality and contact data on this page comes from public federal and state records. We update each utility's record whenever its underlying source publishes new data — typically within days of an EPA SDWIS refresh.
- Contaminants & violations: EPA Safe Drinking Water Information System (SDWIS) plus the Unregulated Contaminant Monitoring Rule (UCMR-5) for PFAS and emerging contaminants.
- Annual reports: St. George Fire District 1's most recent published Consumer Confidence Report (CCR), where available.
- Service area & contact: EPA SDWIS. The compliance records it holds for this system are reported to EPA by Vermont DEC Drinking Water, the state's drinking-water primacy agency.
Spotted a data issue? Use the Spotted something off? link at the bottom of the page — corrections feed back into the next data refresh. Learn more about TapWaterData.
Are you St. George Fire District 1? Publish your 2027 CCR
TapWaterData runs a free CCR publishing service for community water systems. Claim this listing to publish your Consumer Confidence Report here — it inherits this page's search authority and reaches every customer who Googles St. George Fire District 1.
- EPA-compliant distribution. Satisfies the 2027 Revised CCR Rule direct-URL requirement with an auditable archive.
- Publish once a year. Agent-assisted workflow; no login setup for small systems.
- Inherits this page's reach. Your published CCR appears directly on the page customers already find on Google.
Free for operators. No card required. Typical setup: 5 minutes.
Spotted something off on this page?
Residents keep our data honest.
This form corrects our data; it does not reach St. George Fire District 1. For a problem with your water now (discolored water, no water, low pressure, a leak), contact St. George Fire District 1 directly.
Check another location
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
One email a week. Unsubscribe anytime.