Ashland Water and Sewer Dist
Drinking water quality, contact, and Consumer Confidence Report
Serving 1 city in MT · PWSID MT0000458
Ashland Water and Sewer Dist serves 400 people. 1 health-based violation since 2020 in EPA's record — full violation history below.
- People served
- 400
- PFAS
- No results on file
- Health-based violations since 2020
- 1
Data sources: EPA SDWIS, Ashland Water and Sewer Dist's published Consumer Confidence Report, and compliance monitoring reported to EPA by Montana DEQ.
This page summarizes publicly available EPA and CCR records. For health decisions about your water, consult your utility or a licensed professional.
Official Ashland Water and Sewer Dist Resources
Emergency Contact
Help Paying Your Ashland Water and Sewer Dist Water Bill
- Ask Ashland Water and Sewer Dist about payment plans and assistance.
- Call 211 to reach local help with utility bills.Verified from 211.org
- Find your local Community Action Agency.Verified from communityactionpartnership.com
- The federal water-bill program (LIHWAP) ended in March 2024.Verified from acf.govVerified from csd.ca.gov
Water outage or no water?
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Montana
Ashland Water and Sewer Dist Service Area
Loading map...
This map shows the approximate service area for Ashland Water and Sewer Dist. Actual coverage may vary. Contact the utility directly to confirm service availability at your address.
Ashland Water and Sewer Dist Water Quality Grade
Not graded: Monitor
Ashland Water and Sewer Dist reads Monitor. A letter grade is given only beside a Safe verdict.
Is Ashland Water and Sewer Dist Water Safe to Drink?
Ashland Water and Sewer Dist has reported 2 contaminants above EPA health-based guidelines (MCLGs) in at least one city served. Ashland Water and Sewer Dist has 1 health-based EPA violation since 2020 (EPA data as of Q2 2026), none of them open. We recommend reviewing individual city reports below for specific water quality details.
This utility serves 400 people across 1 city in MT. Water quality can vary by location within the service area. Check individual city pages below for detailed contaminant data specific to your area.
Get your water independently tested in Montana →How does Montana water quality rank nationally? →
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Montana
Fluoride in Ashland Water and Sewer Dist Water
Ashland Water and Sewer Dist
PWSID MT0000458
Ashland Water and Sewer Dist reported 3.7 mg/L, at or above the 2.0 mg/L EPA secondary standard and below the 4.0 mg/L EPA maximum contaminant level.
Ashland Water and Sewer Dist Service Area
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
Free forever. Unsubscribe anytime. We never share your email.
Ashland Water and Sewer Dist Contact & Information
B2B Contact Data
B2B Contact Data Available
Contacts for Ashland Water and Sewer Dist
| Name | Title | Phone | |
|---|---|---|---|
| J████ S████ | Water Treatment Supervisor | (555) ███-████ | j████@city████.gov |
| M████ J██████ | Utility Director | (555) ███-████ | m████@water████.org |
Water Sources & Treatment
Water Sources
Treatment Methods
Ashland Water and Sewer Dist Consumer Confidence Report
A Consumer Confidence Report (CCR) is the EPA-mandated annual water-quality report every community water system must publish by July 1 each year (Safe Drinking Water Act §1414(c)(4)). It summarizes contaminants tested, MCL and MCLG comparisons, and any system violations from the prior calendar year.
A current CCR for Ashland Water and Sewer Dist has not been published or validated on TapWaterData yet.
Residents: contact the utility directly using the phone number above, or check the EPA’s national CCR portal. Reports are typically distributed by mail or posted on the utility’s official website.
Ashland Water and Sewer Dist Annual Water Quality Reports
We don’t have a link we can confirm belongs to this system, and we’d rather show none than the wrong utility’s. Montana DEQ publishes drinking-water reports for systems in this state.
Visit Montana DEQWhat is a CCR? The Consumer Confidence Report (CCR) is an annual water quality report that water utilities are required by the EPA to provide to customers. It contains information about your water source, detected contaminants, and compliance status.
EPA Health-Based Violations Since 2020
Ashland Water and Sewer Dist has 1 health-based EPA violation since 2020 (EPA data as of Q2 2026), none of them open.
EPA SDWA violation data as of Q2 2026 (downloaded 2026-07-09).
| Violation | Contaminant or rule | Period | Status | Notice |
|---|---|---|---|---|
| Treatment Technique, Corrective/Expedited Actions (RTCR) | Revised Total Coliform Rule | Aug 2023 - Dec 2023 | Resolved | Tier 2 public notice |
Concerned about what's in your water?
You're viewing 2 contaminants above health-based guidelines here. Your own tap water can differ — upload your test (PDF or a photo) and we'll email a full plain-English reading of every number, free.
Your upload also helps us keep local water data accurate — we only ever share anonymized, area-level summaries.
Upload my testRecommended Water Filters for Ashland Water and Sewer Dist
Based on water quality data from cities served by Ashland Water and Sewer Dist, we recommend NSF-certified filters that can remove contaminants above health guidelines.
Frequently Asked Questions about Ashland Water and Sewer Dist
Is Ashland Water and Sewer Dist water safe to drink?
Does Ashland Water and Sewer Dist have PFAS in its water?
How do I pay my Ashland Water and Sewer Dist water bill?
How many people does Ashland Water and Sewer Dist serve?
What cities does Ashland Water and Sewer Dist serve?
Does Ashland Water and Sewer Dist have any EPA violations?
What is Ashland Water and Sewer Dist's phone number?
Where can I find Ashland Water and Sewer Dist's Consumer Confidence Report?
Similar water utilities in Montana
How we built this page
Water-quality and contact data on this page comes from public federal and state records. We update each utility's record whenever its underlying source publishes new data — typically within days of an EPA SDWIS refresh.
- Contaminants & violations: EPA Safe Drinking Water Information System (SDWIS) plus the Unregulated Contaminant Monitoring Rule (UCMR-5) for PFAS and emerging contaminants.
- Annual reports: Ashland Water and Sewer Dist's most recent published Consumer Confidence Report (CCR), where available.
- Service area & contact: EPA SDWIS. The compliance records it holds for this system are reported to EPA by Montana DEQ, the state's drinking-water primacy agency.
Spotted a data issue? Use the Spotted something off? link at the bottom of the page — corrections feed back into the next data refresh. Learn more about TapWaterData.
Are you Ashland Water and Sewer Dist? Publish your 2027 CCR
TapWaterData runs a free CCR publishing service for community water systems. Claim this listing to publish your Consumer Confidence Report here — it inherits this page's search authority and reaches every customer who Googles Ashland Water and Sewer Dist.
- EPA-compliant distribution. Satisfies the 2027 Revised CCR Rule direct-URL requirement with an auditable archive.
- Publish once a year. Agent-assisted workflow; no login setup for small systems.
- Inherits this page's reach. Your published CCR appears directly on the page customers already find on Google.
Free for operators. No card required. Typical setup: 5 minutes.
Spotted something off on this page?
Residents keep our data honest.
This form corrects our data; it does not reach Ashland Water and Sewer Dist. For a problem with your water now (discolored water, no water, low pressure, a leak), contact Ashland Water and Sewer Dist directly.
Check another location
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
One email a week. Unsubscribe anytime.