Town of Poolesville
Drinking water quality, contact, and Consumer Confidence Report
Serving 1 city in MD · PWSID MD0150002
Town of Poolesville serves 5,400 people. PFAS detected above health guidelines (Perfluorooctanesulfonic acid, Perfluorooctanoic acid) — full contaminant breakdown below.
- People served
- 5,400
- Last EPA sample
- 2025-11-10
- PFAS
- Detected (2 compounds)
- Health-based violations since 2020
- 0
Data sources: EPA SDWIS, Town of Poolesville's published Consumer Confidence Report, and compliance monitoring reported to EPA by Maryland MDE Water Supply Program.
This page summarizes publicly available EPA and CCR records. For health decisions about your water, consult your utility or a licensed professional.
Official Town of Poolesville Resources
Help Paying Your Town of Poolesville Water Bill
- Ask Town of Poolesville about payment plans and assistance.
- Call 211 to reach local help with utility bills.Verified from 211.org
- Find your local Community Action Agency.Verified from communityactionpartnership.com
- The federal water-bill program (LIHWAP) ended in March 2024.Verified from acf.govVerified from csd.ca.gov
Water outage or no water?
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Maryland
Town of Poolesville Service Area
Loading map...
This map shows the approximate service area for Town of Poolesville. Actual coverage may vary. Contact the utility directly to confirm service availability at your address.
Town of Poolesville Water Quality Grade
Not graded: Warning
Town of Poolesville reads Warning. A letter grade is given only beside a Safe verdict.
Is Town of Poolesville Water Safe to Drink?
Town of Poolesville has reported 2 contaminants above EPA health-based guidelines (MCLGs) and 2 above EPA's legal limit (MCL, enforceable from April 26, 2029) in at least one city served. We recommend reviewing individual city reports below for specific water quality details.
This utility serves 5,400 people across 1 city in MD. Water quality can vary by location within the service area. Check individual city pages below for detailed contaminant data specific to your area.
Get your water independently tested in Maryland →How does Maryland water quality rank nationally? →
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Maryland
Learn more about the contaminants detected in Town of Poolesville:
Fluoride in Town of Poolesville Water
Town of Poolesville
PWSID MD0150002
Fluoride was detected in 24.3% of Town of Poolesville's samples (median below the detection limit).
Town of Poolesville Service Area
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
Free forever. Unsubscribe anytime. We never share your email.
Town of Poolesville Contact & Information
B2B Contact Data
B2B Contact Data Available
Contacts for Town of Poolesville
| Name | Title | Phone | |
|---|---|---|---|
| J████ S████ | Water Treatment Supervisor | (555) ███-████ | j████@city████.gov |
| M████ J██████ | Utility Director | (555) ███-████ | m████@water████.org |
Water Sources & Treatment
Water Sources
Treatment Methods
Disinfectant Used
chlorine
Town of Poolesville Consumer Confidence Report
A Consumer Confidence Report (CCR) is the EPA-mandated annual water-quality report every community water system must publish by July 1 each year (Safe Drinking Water Act §1414(c)(4)). It summarizes contaminants tested, MCL and MCLG comparisons, and any system violations from the prior calendar year.
A current CCR for Town of Poolesville has not been published or validated on TapWaterData yet.
Residents: contact the utility directly using the phone number above, or check the EPA’s national CCR portal. Reports are typically distributed by mail or posted on the utility’s official website.
Town of Poolesville Annual Water Quality Reports
Historical reports are being compiled. Check back soon for archived water quality data.
What is a CCR? The Consumer Confidence Report (CCR) is an annual water quality report that water utilities are required by the EPA to provide to customers. It contains information about your water source, detected contaminants, and compliance status.
EPA Health-Based Violations Since 2020
Town of Poolesville has no health-based EPA violation since 2020 (EPA data as of Q2 2026).
EPA SDWA violation data as of Q2 2026 (downloaded 2026-07-09).
Concerned about what's in your water?
You're viewing 4 contaminants above health-based guidelines here. Your own tap water can differ — upload your test (PDF or a photo) and we'll email a full plain-English reading of every number, free.
Your upload also helps us keep local water data accurate — we only ever share anonymized, area-level summaries.
Upload my testRecommended Water Filters for Town of Poolesville
Based on water quality data from cities served by Town of Poolesville, we recommend NSF-certified filters that can remove contaminants above health guidelines.
Filter guides for the contaminants detected here:
Frequently Asked Questions about Town of Poolesville
Is Town of Poolesville water safe to drink?
Does Town of Poolesville have PFAS in its water?
How do I pay my Town of Poolesville water bill?
How many people does Town of Poolesville serve?
What cities does Town of Poolesville serve?
Does Town of Poolesville have any EPA violations?
What is Town of Poolesville's phone number?
Where can I find Town of Poolesville's Consumer Confidence Report?
Similar water utilities in Maryland
How we built this page
Water-quality and contact data on this page comes from public federal and state records. We update each utility's record whenever its underlying source publishes new data — typically within days of an EPA SDWIS refresh.
- Contaminants & violations: EPA Safe Drinking Water Information System (SDWIS) plus the Unregulated Contaminant Monitoring Rule (UCMR-5) for PFAS and emerging contaminants.
- Annual reports: Town of Poolesville's most recent published Consumer Confidence Report (CCR), where available.
- Service area & contact: EPA SDWIS. The compliance records it holds for this system are reported to EPA by Maryland MDE Water Supply Program, the state's drinking-water primacy agency.
Spotted a data issue? Use the Spotted something off? link at the bottom of the page — corrections feed back into the next data refresh. Learn more about TapWaterData.
Are you Town of Poolesville? Publish your 2027 CCR
TapWaterData runs a free CCR publishing service for community water systems. Claim this listing to publish your Consumer Confidence Report here — it inherits this page's search authority and reaches every customer who Googles Town of Poolesville.
- EPA-compliant distribution. Satisfies the 2027 Revised CCR Rule direct-URL requirement with an auditable archive.
- Publish once a year. Agent-assisted workflow; no login setup for small systems.
- Inherits this page's reach. Your published CCR appears directly on the page customers already find on Google.
Free for operators. No card required. Typical setup: 5 minutes.
Spotted something off on this page?
Residents keep our data honest.
This form corrects our data; it does not reach Town of Poolesville. For a problem with your water now (discolored water, no water, low pressure, a leak), contact Town of Poolesville directly.
Check another location
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
One email a week. Unsubscribe anytime.