Albany Water Works
Drinking water quality, contact, and Consumer Confidence Report
Serving 1 city in KY · PWSID KY0270003
Albany Water Works serves 14,702 people. 2 health-based violations since 2020 in EPA's record — full violation history below.
- People served
- 14,702
- Last EPA sample
- 2025-10-14
- PFAS
- Not detected
- Health-based violations since 2020
- 2
Data sources: EPA SDWIS, Albany Water Works's published Consumer Confidence Report, and compliance monitoring reported to EPA by Kentucky Division of Water.
This page summarizes publicly available EPA and CCR records. For health decisions about your water, consult your utility or a licensed professional.
Official Albany Water Works Resources
Emergency Contact
Help Paying Your Albany Water Works Water Bill
- Ask Albany Water Works about payment plans and assistance.
- Call 211 to reach local help with utility bills.Verified from 211.org
- Find your local Community Action Agency.Verified from communityactionpartnership.com
- The federal water-bill program (LIHWAP) ended in March 2024.Verified from acf.govVerified from csd.ca.gov
Water outage or no water?
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Kentucky
Albany Water Works Service Area
Loading map...
This map shows the approximate service area for Albany Water Works. Actual coverage may vary. Contact the utility directly to confirm service availability at your address.
Albany Water Works Water Quality Grade
Not graded: Monitor
Albany Water Works reads Monitor. A letter grade is given only beside a Safe verdict.
Is Albany Water Works Water Safe to Drink?
Albany Water Works has reported 1 contaminant above EPA health-based guidelines (MCLGs) in at least one city served. Albany Water Works has 2 health-based EPA violations since 2020 (EPA data as of Q2 2026), none of them open. We recommend reviewing individual city reports below for specific water quality details.
This utility serves 14,702 people across 1 city in KY. Water quality can vary by location within the service area. Check individual city pages below for detailed contaminant data specific to your area.
Get your water independently tested in Kentucky →How does Kentucky water quality rank nationally? →
Boil water advisories are issued by water systems and state agencies, and they change from day to day. Boil water advisories in Kentucky
Fluoride in Albany Water Works Water
Albany Water Works
PWSID KY0270003
Albany Water Works reported 0.6 mg/L, below the 0.7 mg/L U.S. Public Health Service recommendation.
Albany Water Works Service Area
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
Free forever. Unsubscribe anytime. We never share your email.
Albany Water Works Contact & Information
B2B Contact Data
B2B Contact Data Available
Contacts for Albany Water Works
| Name | Title | Phone | |
|---|---|---|---|
| J████ S████ | Water Treatment Supervisor | (555) ███-████ | j████@city████.gov |
| M████ J██████ | Utility Director | (555) ███-████ | m████@water████.org |
Water Sources & Treatment
Water Sources
Treatment Methods
Albany Water Works Consumer Confidence Report
A Consumer Confidence Report (CCR) is the EPA-mandated annual water-quality report every community water system must publish by July 1 each year (Safe Drinking Water Act §1414(c)(4)). It summarizes contaminants tested, MCL and MCLG comparisons, and any system violations from the prior calendar year.
A current CCR for Albany Water Works has not been published or validated on TapWaterData yet.
Residents: contact the utility directly using the phone number above, or check the EPA’s national CCR portal. Reports are typically distributed by mail or posted on the utility’s official website.
Albany Water Works Annual Water Quality Reports
We don’t have a link we can confirm belongs to this system, and we’d rather show none than the wrong utility’s. Kentucky Division of Water publishes drinking-water reports for systems in this state.
Visit Kentucky Division of WaterWhat is a CCR? The Consumer Confidence Report (CCR) is an annual water quality report that water utilities are required by the EPA to provide to customers. It contains information about your water source, detected contaminants, and compliance status.
EPA Health-Based Violations Since 2020
Albany Water Works has 2 health-based EPA violations since 2020 (EPA data as of Q2 2026), none of them open.
EPA SDWA violation data as of Q2 2026 (downloaded 2026-07-09).
| Violation | Contaminant or rule | Period | Status | Notice |
|---|---|---|---|---|
| Maximum Contaminant Level Violation, Average | Total Haloacetic Acids (HAA5) | Oct 2021 - Dec 2021 | Resolved | Tier 2 public notice |
| Maximum Contaminant Level Violation, Average | Total Haloacetic Acids (HAA5) | Apr 2021 - Jun 2021 | Resolved | Tier 2 public notice |
Concerned about what's in your water?
You're viewing 1 contaminant above health-based guidelines here. Your own tap water can differ — upload your test (PDF or a photo) and we'll email a full plain-English reading of every number, free.
Your upload also helps us keep local water data accurate — we only ever share anonymized, area-level summaries.
Upload my testRecommended Water Filters for Albany Water Works
Based on water quality data from cities served by Albany Water Works, we recommend NSF-certified filters that can remove contaminants above health guidelines.
Frequently Asked Questions about Albany Water Works
Is Albany Water Works water safe to drink?
Does Albany Water Works have PFAS in its water?
How do I pay my Albany Water Works water bill?
How many people does Albany Water Works serve?
What cities does Albany Water Works serve?
Does Albany Water Works have any EPA violations?
What is Albany Water Works's phone number?
Where can I find Albany Water Works's Consumer Confidence Report?
Similar water utilities in Kentucky
How we built this page
Water-quality and contact data on this page comes from public federal and state records. We update each utility's record whenever its underlying source publishes new data — typically within days of an EPA SDWIS refresh.
- Contaminants & violations: EPA Safe Drinking Water Information System (SDWIS) plus the Unregulated Contaminant Monitoring Rule (UCMR-5) for PFAS and emerging contaminants.
- Annual reports: Albany Water Works's most recent published Consumer Confidence Report (CCR), where available.
- Service area & contact: EPA SDWIS. The compliance records it holds for this system are reported to EPA by Kentucky Division of Water, the state's drinking-water primacy agency.
Spotted a data issue? Use the Spotted something off? link at the bottom of the page — corrections feed back into the next data refresh. Learn more about TapWaterData.
Are you Albany Water Works? Publish your 2027 CCR
TapWaterData runs a free CCR publishing service for community water systems. Claim this listing to publish your Consumer Confidence Report here — it inherits this page's search authority and reaches every customer who Googles Albany Water Works.
- EPA-compliant distribution. Satisfies the 2027 Revised CCR Rule direct-URL requirement with an auditable archive.
- Publish once a year. Agent-assisted workflow; no login setup for small systems.
- Inherits this page's reach. Your published CCR appears directly on the page customers already find on Google.
Free for operators. No card required. Typical setup: 5 minutes.
Spotted something off on this page?
Residents keep our data honest.
This form corrects our data; it does not reach Albany Water Works. For a problem with your water now (discolored water, no water, low pressure, a leak), contact Albany Water Works directly.
Check another location
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
One email a week. Unsubscribe anytime.