Choose a country: United States
iSpring UVF55FS
- Whole-house
- Point of entry
- City water
- Well water
- Complete system
- No listing
$304.20as of 2026-09-10
Secondary sourceVerified 2026-09-10Retailer listing
Affiliate disclosure: We earn a commission on purchases made through these links, at no extra cost to you. It pays for the directory lookups and price checks on this page. Learn more.
Our verdict on the iSpring UVF55FS
The iSpring UVF55FS is a 12 GPM point-of-entry UV system for municipal or well water, but the manual limits it to clear, prefiltered water below 0.3 ppm iron and 120 ppm hardness and requires 110–120 V power.[1][2]
Best for
- Homes on municipal or well water needing point-of-entry UV treatment at up to 12 GPM
Not for
- Supplies at or above 0.3 ppm iron, 120 ppm hardness, or 1 NTU turbidity without pretreatment
- Installation sites without 110–120 V power
Primary sourceVerified 2026-09-10Brand officialManufacturer datasheet
Certification check: iSpring UVF55FS
No listing found in the NSF, IAPMO R&T, and WQA directories as of 2026-09-10.
| Directory | Result | Listing |
|---|---|---|
| NSF | No listing found (checked 2026-09-10) | View listing |
| IAPMO R&T | No listing found (checked 2026-09-10) | No URL recorded |
| WQA | No listing found (checked 2026-09-10) | No URL recorded |
Claimed vs. certified: iSpring UVF55FS
| Contaminant | Status | Third-party listing | What the brand says |
|---|---|---|---|
| chlorine-resistant impurities | Marketed only | No entry |
|
| impurities commonly found in private wells and city water | Marketed only | No entry |
|
What the iSpring UVF55FS does not do
The manual states, “The ultraviolet water filter is not designed to eliminate bad tastes or smells, biological materials, chemicals, silt, heavy metal, and other kinds of impurities.” The iSpring UVF55FS's recorded operating limits are iron up to 0.3 ppm, hardness up to 120 ppm, turbidity up to 1 NTU, pH at least 4 pH and up to 8 pH, chlorine concentration up to 1 mg/L (ppm), incoming particle size up to 20 microns, verified 2026-09-10.
The manual states, “The ultraviolet water filter is not designed to eliminate bad tastes or smells, biological materials, chemicals, silt, heavy metal, and other kinds of impurities.”[1]
Primary sourceVerified 2026-09-10Manufacturer datasheet
The manual states, “It does not reduce sediments that affect the efficiency of the UV lamp.”[1]
Primary sourceVerified 2026-09-10Manufacturer datasheet
Operating limits
| Parameter | Limit | What it means |
|---|---|---|
| iron | up to 0.3 ppm[1] | The warranty conditions require feed-water iron to be less than 0.3 ppm. Primary sourceVerified 2026-09-10Manufacturer datasheet |
| hardness | up to 120 ppm[1] | The warranty conditions require feed-water hardness to be less than 120 ppm. Primary sourceVerified 2026-09-10Manufacturer datasheet |
| turbidity | up to 1 NTU[1] | The manual requires turbidity below 1.0 NTU. Primary sourceVerified 2026-09-10Manufacturer datasheet |
| pH | at least 4 pH and up to 8 pH[1] | The warranty conditions specify feed-water pH between 4 and 8. Primary sourceVerified 2026-09-10Manufacturer datasheet |
| chlorine concentration | up to 1 mg/L (ppm)[1] | The warranty conditions require chlorine concentration of 1.0 mg/L (ppm) or less. Primary sourceVerified 2026-09-10Manufacturer datasheet |
| incoming particle size | up to 20 microns[1] | Incoming water must be clear and free of particles larger than 20 microns. Primary sourceVerified 2026-09-10Manufacturer datasheet |
Do not buy it for these situations
ElectricityDo not choose this installation point unless 110–120 V, 50/60 Hz power is available for the UV lamp and ballast.[1]
Primary sourceVerified 2026-09-10Manufacturer datasheet
Water pressureFeed-water pressure must remain between 4 and 85 psi; the manual also calls for a pressure regulator when pressure exceeds 43 psi to protect the quartz sleeve.[1]
Primary sourceVerified 2026-09-10Manufacturer datasheet
How the iSpring UVF55FS works
The iSpring UVF55FS treats water in one stage: Ultraviolet (UV), verified 2026-09-10.[1]
| Stage | Method | Media | Micron rating |
|---|---|---|---|
| 1 | Ultraviolet (UV) | Not recorded | Not recorded |
Primary sourceVerified 2026-09-10Manufacturer datasheet
Fit and sizing: iSpring UVF55FS
The iSpring UVF55FS is a whole-house unit installed at the point of entry, for city water and well water. It is rated for 12 GPM of service flow, verified 2026-09-10.
| Form factor | Whole-house |
|---|---|
| Installed at | Point of entry (whole house) |
| Water source | City water and Well water |
| Service flow | 12 GPM[1][2] Primary sourceVerified 2026-09-10Manufacturer datasheetBrand official |
| Operating pressure | 4–85 psi[1] Primary sourceVerified 2026-09-10Manufacturer datasheet |
| Operating temperature | 32–100 °F[1] Primary sourceVerified 2026-09-10Manufacturer datasheet |
| Connection size | 1 in[1] Primary sourceVerified 2026-09-10Manufacturer datasheet |
| Needs electricity | Yes[1] Primary sourceVerified 2026-09-10Manufacturer datasheet |
What the iSpring UVF55FS really costs
The iSpring UVF55FS costs $304.20 as of 2026-09-10.
DIY install[1]
Primary sourceVerified 2026-09-10Brand official
Replacement schedule
| Element | Replace | Cost per year |
|---|---|---|
| UVB55FS | every 12 months | $79.99 |
Primary sourceVerified 2026-09-10Manufacturer datasheetBrand official
Ten-year cost of ownership
| Purchase price (as of 2026-09-10) | $304.20 |
|---|---|
| Replacement elements, 10 × $79.99/year | $799.90 |
| Sum of the lines above (as of 2026-09-10) | $1,104.10 |
Warranty: One-year limited manufacturer warranty for the original purchaser, parts only; labor, the UV lamp, and the quartz sleeve are excluded. (1 years)[1]
Primary sourceVerified 2026-09-10Manufacturer datasheet
Money-back guarantee: 30-day money-back guarantee (30 days)[1]
Primary sourceVerified 2026-09-10Manufacturer datasheet
Installing the iSpring UVF55FS
Installing the iSpring UVF55FS is an easy job. DIY install, verified 2026-09-10.
Manufacturer documentation
- Install manual: https://www.ispringfilter.com/index.php?rt=account/download/startdownload&download_id=46 (accessed 2026-09-10)
- Install video: https://www.youtube.com/watch?v=YJMH7BMXMIc (accessed 2026-09-10)
Ongoing maintenance
- Replace the UVB55FS lamp — every 12 months
- Clean the lamp and quartz sleeve two to three times per year when the unit can be unmounted easily
- Replace the lamp and quartz sleeve every one to two years when periodic cleaning is not practical
Primary sourceVerified 2026-09-10Manufacturer datasheet
Track record: iSpring UVF55FS
iSpring shows 4.8 out of 5 from 34 reviews as of 2026-09-10; Amazon shows 4.4 out of 5 from 614 reviews as of 2026-09-10.
What owners praise
Amazon's customer-review summary reports that buyers commonly praise the unit's build quality and ease of installation.[1]
Secondary sourceVerified 2026-09-10Amazon review
What owners complain about
The iSpring UVF55FS against its family and its rivals
The iSpring UVF55FS has 2 siblings in its family: UVF11A, UVF8.
The rest of the family
| Model | What differs |
|---|---|
| UVF11A | A 1 GPM, 100–120 V under-sink RO add-on; UVF55FS is the 12 GPM whole-house model. |
| UVF8 | A separate LED under-sink add-on, not an alternate model name for UVF55FS. |
iSpring UVF55FS questions, answered
Does the iSpring UVF55FS work with well and municipal water?
What does the iSpring UVF55FS not remove?
Verified health claim
It does not replace filtration for taste, odor, chemicals, silt, heavy metals, or sediment. The manual states, “The ultraviolet water filter is not designed to eliminate bad tastes or smells, biological materials, chemicals, silt, heavy metal, and other kinds of impurities,” and separately says it does not reduce sediment.
Sources: [1]
How often should the UVF55FS lamp be replaced?
Does the UVF55FS need electricity?
Yes—the UVF55FS requires 110–120 V, 50/60 Hz electrical input. The manual instructs connecting power after plumbing installation is complete.
Sources: [1]
Is the iSpring UVF55FS listed in the major certification directories?
What is the rated flow of the iSpring UVF55FS?
The UVF55FS is rated at 12 GPM. The manual also says to add flow- or pressure-limiting equipment if incoming flow exceeds the rated flow.
Sources: [1]
Sources and data report: iSpring UVF55FS
Every figure above is taken from the highest-trust source that carries it and re-derived from that source by a separate check. How we verify product data.
What we could not establish, and why
| Field | Why it is blank |
|---|---|
| identity.family | The official retail page and dealer page categorize UVF55FS among UV systems but do not name a formal product family or line. |
| identity.upc | The official product page, exact-model manual, dealer page, and opened Amazon listing do not publish a UPC for UVF55FS. |
| certified.certIndexKey | A repository search found no UVF55FS, UVF11A, or UVF8 join entry in the local certification index; this is only a statement about the local corpus. |
| fit.bathroomsServed | The official product page, dealer page, and exact-model manual publish 12 GPM flow but no bathroom-count sizing range. |
| fit.householdSize | The official product page, dealer page, and exact-model manual do not state a household-size range. |
| fit.roOutputGpd | Not applicable: the manufacturer identifies UVF55FS as a point-of-entry UV system, not a reverse-osmosis membrane. |
| fit.roTankCapacity | Not applicable: the manufacturer identifies UVF55FS as a point-of-entry UV system and publishes no RO storage tank. |
| fit.dimensions | The retail page publishes 38 in L × 3 in W × 3 in H and another table publishes 37.5 in length, while the schema requires an unambiguous height-width-depth tuple; neither source identifies length as depth. |
| fit.requiresDrain | The exact-model manual discusses draining the chamber during service but does not state whether a permanent drain connection is required. |
| cost.msrp | The official retail page showed $338.99 but did not label it MSRP or manufacturer's suggested price. |
| cost.tenYearTotalUsd | A defensible total could not be established: the lamp is $79.99 annually, but the manual gives the quartz sleeve only a one-to-two-year conditional replacement range and the schema cannot encode that range without choosing an unsupported interval. |
| cost.wasteRatio | The manufacturer identifies UVF55FS as UV treatment rather than RO and does not publish a product-water-to-wastewater ratio. |
| install.estimatedHours | The manual, official dealer page, and official installation video provide steps but do not publish an installation-time estimate. |
| install.tools | The manual names plumbing fittings, valves, Teflon tape, gloves, and cleaning materials but does not provide a tool list; supplies were not relabeled as tools. |
| comparisons.familyCertNote | No listing found in the NSF, IAPMO R&T, and WQA directories as of 2026-09-10; the live checks therefore do not support a family certification statement. |
| seo.cluster.primary.kd | The approved build-list context supplies no keyword-difficulty value, and the live SERP capture does not provide one. |
| seo.verification | The independent verify loop has not run; the pipeline stamps this field only after verification. |
Every source behind this page
- Brand officialaccessed: 2026-09-10https://www.ispringfilter.com/ispring-whole-house-uv-filter-system-sterilizer
- The exact-model UVF55FS official retail page was active, marked In Stock, and offered the product for purchase on 2026-09-10.
- The official product page identifies UVF55FS as a whole-house system for private-well and municipal water and publishes flow up to 12 GPM.
- The official product page says the model is for private-well and municipal supplies and publishes flow up to 12 GPM.
- The official UVF55FS page expressly discusses private-well and municipal water use.
- Manufacturer datasheetaccessed: 2026-09-10https://www.ispringfilter.com/index.php?rt=account/download/startdownload&download_id=46
- The UVF55FS manual identifies the unit as POE, gives 110–120 V input, requires clear prefiltered water, and sets the iron, hardness, and turbidity limits used in the verdict.
- The exact-model manual identifies one ultraviolet treatment chamber and lamp and instructs installing it as the last stage after filtration.
- The quoted limitation appears verbatim in the manual's Before Installation section.
- The quoted sediment limitation appears verbatim in the manual's Before Installation section.
- The manual's warranty conditions state maximum feed-water iron must be less than 0.3 ppm.
- The manual's warranty conditions state feed-water hardness must be less than 120 ppm.
- The manual's Water Quality Guidelines and warranty conditions require turbidity below 1.0 NTU.
- The manual's warranty conditions specify feed-water pH between 4 and 8.
- The manual's warranty conditions limit chlorine concentration to 1.0 mg/L (ppm) or less.
- The manual requires a sediment prefilter and says incoming water must be free of particles larger than 20 microns.
- The manual lists electrical input as 110–120 V, 50/60 Hz and instructs connecting power during startup.
- The manual lists 4–85 psi operating pressure and calls for a pressure regulator above 43 psi to protect the quartz sleeve.
- The UVF55FS manual identifies the system as POE and gives a rated flow of 12 GPM.
- The manual's Specs and Conditions table lists minimum operating pressure of 4 psi and maximum operating pressure of 85 psi.
- The manual's warranty conditions require feed-water temperature from 32°F through 100°F.
- The manual says both ports are 1-inch MNPT.
- The manual specifies 110–120 V, 50/60 Hz input and directs the installer to connect power for startup.
- The manual identifies UVB55FS as the lamp model and instructs replacing the lamp every 12 months.
- The manual states a one-year limited parts warranty for the original purchaser and excludes labor, the UV lamp, and the quartz sleeve.
- The warranty-registration section of the manual says iSpring provides a 30-day money-back guarantee.
- The opened 16-page UVF55FS manual provides installation, operating conditions, maintenance, troubleshooting, and warranty terms.
- The manual specifies annual lamp replacement, cleaning two to three times per year when practical, and a one-to-two-year lamp-and-sleeve replacement alternative.
- The manual requires clear, prefiltered water and gives the iron, hardness, and turbidity limits in the answer.
- The manual's Before Installation section supplies the quoted limitation and says the unit does not reduce sediment.
- The manual identifies UVB55FS and directs replacement every 12 months.
- The manual lists 110–120 V, 50/60 Hz input and tells the installer to connect power for startup.
- The manual lists rated flow as 12 GPM and instructs installing a limiter if flow exceeds the rating.
- Retailer listingaccessed: 2026-09-10https://www.amazon.com/dp/B0GY9STKL4
- The Amazon landing page identified brand iSpring, model UVF55FS, ASIN B0GY9STKL4, and a current price of $304.20.
- Amazon's review summary showed 137 of 158 quality mentions and 112 of 121 installation mentions as positive for the selected UVF55FS page.
- Amazon's review summary showed 48 of 65 durability mentions and 25 of 32 UV-lamp reliability mentions as negative.
- Amazon's review summary showed 29 of 37 leakage mentions as negative.
- Brand officialaccessed: 2026-09-10https://www.ispringwatersystems.com/product/ispring-55w-whole-house-uv-water-filter-with-smart-flow-sensor-switch/
- The official dealer page says mounting clips are included for easy DIY installation.
- The official dealer page characterizes installation as easy DIY and says mounting clips are included.
- Brand officialaccessed: 2026-09-10https://www.ispringfilter.com/ispring-uvb55fs-55w-uv-replacement-lamp-uv-bulb
- The official UVB55FS replacement-lamp page says it fits UVF55FS and listed a price of $79.99 on 2026-09-10.
- The official replacement page says UVB55FS fits UVF55FS.
- Brand officialaccessed: 2026-09-10https://www.youtube.com/watch?v=YJMH7BMXMIc
- The iSpring Filter channel video is titled Installation & UV Bulb Replacement of iSpring UVF55FS UV Water Filter | Step by Step.
- Government agencyaccessed: 2026-09-10https://www.cpsc.gov/search?search_api_fulltext=iSpring%20UVF55FS
- A CPSC site search for iSpring UVF55FS returned No Results on 2026-09-10.
- Unverifiedaccessed: 2026-09-10https://duckduckgo.com/?q=%22iSpring%22+%22UVF55FS%22+recall+lawsuit
- A live web search for the exact brand and model with recall and lawsuit terms returned only product and retailer pages and no relevant news result on 2026-09-10.
- NSF listingaccessed: 2026-09-10https://info.nsf.org/Certified/DWTU/Listings.asp?TradeName=UVF55FS
- The live NSF product-name search for UVF55FS returned No Matching Products Found.
- IAPMO listingaccessed: 2026-09-10https://pld.iapmo.org/
- The live IAPMO R&T Listed Model search for UVF55FS returned No data found.
- WQA listingaccessed: 2026-09-10https://find.wqa.org/find-products#/
- The live WQA Manufacturer / Brand / Model search for UVF55FS returned No results.
Cite this page
TapWaterData Editorial. "iSpring UVF55FS Whole House UV Water Filter Review." TapWaterData, verified 2026-09-10. https://www.tapwaterdata.com/filters/brand/ispring/uvf55fs
Get the Weekly Water Brief
One email a week on water testing, treatment, and what water-quality data means for your home.
One email a week. Unsubscribe anytime.